call us: (UK) 01925 85 2225
BUILDING - REPAIR - MAINTENANCE - INDUSTRIAL & CIVIL ENGINEERING SUPPLIES

Swimming Pool Repair Products - Waterproofing, cracks, leaks & slippery surfaces

Get In Touch

Over 1,000 International Products Stocked
FREE Independent Technical Advice

Swimming Pool Repair Products and Materials - Waterproofing, cracks, leaks & slippery surfaces

materials and products for WATERPROOFING concrete and masonry SWIMMING POOL STRUCTURES

For project specific advice, specification guidance, quotations, lead times and delivery options call us on 01925852225 or CONTACT US. Sending photographs of the areas of the swimming pool requiring repair will aid us to find the best solution for your project.

REPAIRING LEAKS IN SWIMMING POOLS

feb plug / feb waterplug is an ultra rapid setting cementitious repair mortar used to plug leaks that can be used in live leak situations where water is running. Sets in approx 1-3 minutes. Can be used in underwater situations using the correct techniques.

waterplug is a rapid setting hydraulic cement repair mortar that can be used in running water and underwater situations using the correct technique.

PATCH REPAIRS TO CONCRETE SWIMMING POOL STRUCTURES

NatCem35 is a modified natural cement repair mortar suitable for patch repairing concrete swimming pool floors, walls and steps. Suitable for the repair of in situ and precast concrete structural elements. It can be applied from 10mm thick and above to repair damage, make good surfaces, and protect any exposed and rusting steel reinforcement bars (rebar) without the need for additional primers. It is a versatile material and can be used underwater using the correct techniques.

Epoxy resin repair mortars such as Tufpatch FS can be used to fix damaged steps, particularly the edges / corners / arisses, while the swimming pool is empty and the concrete has dried out, to give a hard wearing long-lasting repair that can be over painted or tiled. 

REPAIRING CRACKS IN SWIMMING POOLS:

Resin injection grouts - resin injection grouts to repair cracks down to 0.25mm wide

tanking and waterproofing for swimming pools

Febtank Super is a slurry-applied cementitious coating for masonry and concrete, available in grey and white.

Thoroseal Super is a cementitious slurry-applied coating for concrete and masonry structures. 

NatCem 35 is a modified natural cement waterproofing render applied at a minimum of 10mm thick. It has excellent chemical resistance, resistant to chloride penetration and will protect the underlying structure. It can also be used as a patch repair mortar.

COATINGS FOR SWIMMING POOL STRUCTURES:

Renderoc ST05 is a polymer modified cementitious coating / mortar that can be used to protect a concrete or masonry structure from water ingress, moisture, carbonation and chloride, applied at 0-5mm.

JOINT SEALANTS FOR SWIMMING POOLS:

Supercast PVC Waterstops are extruded PVC waterstops for sealing movement and construction joints in cast in situ concrete, suitable for water-retaining structures such as swimming pools. Installed at construction stage.

Supercast Swellable Hydrophilic Waterbars are rectangular 5mm x 20mm (Supercast SW10) elastomeric strips free from rubber and bentonite, that swells upon contact with water creating a watertight seal. Use in construction joints (not movement joints) between different sections of new insitu concrete and between new and existing concrete junctions. See Waterbars for more information.

Arbokol 2150 is a two-part polysulphide sealant for structural joints in swimming pools and other water retaining structures.  It must be fully cured before coming in to contact with water or swimming pool chemicals. 

Arbokol 1025 SP is a two-part epoxy sealant for stress relieving movement joints where compression is mainly accommodated, such as tile-to-tile junctions near base/wall.  Highly waterproof and chemically resistant to chlorine and other common cleaning chemicals.  It is resistant to being immersed in water for long periods.

Arbosil 1096 is a low modulus silicone sealant suitable for sealing windows, glass wall, curtain wall, powder coated frames, PVCu frames, polycarbonate and acrylic sheeting in swimming pool environments. Available in a range of colours.

Sikasil Pool - is a sealant with very high water resistance and very high chlorine resistance making it ideal for use in swimming pools and permanently wet locations, including those permanently under-water. 

ANTI-SLIP COATING FOR TILES IN SWIMMING POOLS, CHANGING ROOMS AND SHOWER FLOORS:

Anti-slip tile treatment - is an anti-slip clear coating that can be painted on to slippy tile surfaces to reduce the likelihood of trips, slips and falls.

ARCON CONSTRUCTION SUPPLIES, 19-20 PRESTWOOD COURT, LEACROFT ROAD, RISLEY, WARRINGTON, WA3 6SB

TEL: 01925 852225 - EMAIL: mail@arconsupplies.co.uk

COOKIE NOTICE

To continue viewing this site please accept cookies by selecting the accept cookies button at the bottom of this page.

Accept Cookies