BBA Approved High Strength Rapid Setting Concrete Ultracrete QC10

Deep section repairs, haunching, ironwork bedding; Sets in 10-20mins, Can be opened to traffic in just 2 hours

Ultracrete QC10 is a fast setting, high strength, shrinkage-compensated concrete ideal for deep section repairs, ironwork reinstatement, backfilling and commercial/high performance sign/post installation.

Ultracrete QC10 an be applied at 30-250mm in one pass and only requires the addition of clean water to mix on site either by hand or mechanically. 

No primer required - simply ensure the area is pre-soaked with clean water (without leaving any standing / ponding water).

Ultracrete QC10 is used as part of the HAPAS Approved Ultracrete Manhole Reinstatement System, see VIDEO

KEY FEATURES:

• HAPAS Approved for manhole / ironwork reinstatements and frame bedding as part of the complete system shown in the video link above.
• BBA approved 
• London Underground and Overground approved, compliance number 394
• Shrinkage compensated (often referred to as non-shrink)
• Rapid setting, usually 10-20 minutes
• High early strength, it achieves 20N/mm² in 2 hours in test conditions at 20ºC
• Area can be open to traffic in just 2 hours after completing the repair or ironwork reinstatement

INSTRUCTIONS FOR A THICK SECTION REPAIR USING QC10: DATA SHEET

INSTRUCTIONS FOR APPLICATION AS PART OF THE HAPAS APPROVED MANHOLE REINSTATEMENT: DATA SHEET

INSTRUCTIONS FOR BARRIER, POST, SIGN AND FENCING FIXING USING QC10: DATA SHEET

INSTRUCTIONS FOR HAUNCHING USING QC10: DATA SHEET