Arcon have been supplying industrial and warehousing facilities with specialist installation, repair and maintenance materials for nearly 30 years. We supply both direct to industry or to builders and contractors commissioned to carry out works. Call us on 01925852225 for project specific recommendation, technical advice, specification guidance, quotations and product availability or fill out a CONTACT US form.
Food safe hygienic wall and floor paints, coatings & resin screeds. Surfaces that can be steam-cleaned if required, chemically resistant finishes, anti-slip finishes, impact resistant & heavily trafficked surfaces.
We supply a full range of resin floor finishes from basic single-part paint, coatings and self-levellers to screeds suitable for a wide variety of industry and warehousing requirements. Click here for resin finishes for external applications. For heavy duty uses we supply polyurethane resin screeds and epoxy resin screeds. We also supply line marking paints and coatings for both internal and external use.
Self-levelling screeds to create super flat floors which provide an ultra-high strength, impact and abrasion resistant surface finish suitable for automated guided vehicles (AGVs), and very narrow aisle (VNA) trucks. Can help prevent damage to vehicles, destabilised loads, and slips, trips and falls.
Concrete repair materials for both internal and external applications. Materials to repair cracks, potholes, surface spalling, exposed steel reinforcements, eroded and damaged surfaces. Liquid applied dust-proofers and sealers can be used to prevent surface dusting.
Materials to repair concrete floors in cold stores, refrigerated spaces, freezers and blast chillers, which can be applied and set at temperatures down to -20°C and harden quickly to ensure areas can be back up and running in short periods of time.
Often referred to as non-slip or anti-slip materials which provide a surface that is slip-resistant even if there is standing water or spillages or oil, grease, food etc. There are a range of solutions that provide varying degrees of slip-resistance which can be tailored to the exact situations you need to overcome. Both outdoor and indoor solutions are available for floors, ramps, steps, stairs (including high-vis stair nosing edging strips), walkways, balconies, factory floors, crossings and vehicular ramps.
Concrete floor movement joints (often called expansion joints but equally accommodate contraction) sealants and jointing materials for resin floors, suitable for heavy trafficking by forklift trucks, machine wheels, trolley wheels, automated guided vehicles (AGVs), and very narrow aisle (VNA) trucks. Also movement joint sealants for external uses suitable for heavy trafficking by HGVs, forklift trucks and other operation vehicles.
Liquid applied damp proof membranes can be applied to ground-bearing concrete floors and slabs to prevent moisture penetration from below ground. Waterproof coating and water plugging materials to plug leaks are also available for basement walls and floors, retaining walls, bund walls etc.
Suspending operations in specific areas to carry out repairs is sometimes inevitable. We supply materials that can be trafficked quickly after initial application to ensure downtime is limited to an absolute minimum.
We supply materials for fast-track repairs that can withstand heavy trafficking by HGVs etc that cure quickly to ensure yards are back up and running quickly. We also supply movement joint repair sealant for external applications, post-fixing grouts for the installation of bollards and vehicle barriers, line-marking paints, and outdoor slip-resistant finishes for walkways, ramps and steps.
To continue viewing this site please accept cookies by selecting the accept cookies button at the bottom of this page.Accept Cookies