call us: (UK) 01925 85 2225
BUILDING - REPAIR - MAINTENANCE - INDUSTRIAL & CIVIL ENGINEERING SUPPLIES

Hygienic floor & wall coatings for the food industry

Get In Touch

Over 1,000 International Products Stocked
FREE Independent Technical Advice

Hygienic floor & wall coatings for the food industry

Seamless non-absorbent easy to clean resin coatings and screeds

Hygiene is of paramount importance in the food and beverage industry.  It is imperative that floor and wall finishes aid and support your rigorous processes. Joints and cracks can collect dirt and harbour microbes.  To combat this we supply a wide range of resin floor and wall coatings that are seamless - unlike vinyl flooring and PVC wall cladding.  Choosing the correct product for your manufacturing processes and cleaning regimes is crucial. The correct product will be:

• Hygienic - non-absorbent, non-toxic & easily cleanable.

• Chemically resistant - to products, processing chemicals, cleaning and sanitising agents.

• Physically durable - resistant to steam, moisture, cold, heat, abrasion & chipping.

• Easy to maintain

Call us on 01925852225 to discuss project specific requirements, get application advice, quotations and availability or CONTACT US online.

seamless hygienic wall coatings for food manufacturing premises

arcon-resuseal-wall-150pixResuseal Wall Gloss - a two-part water-based epoxy resin coating formulated specifically for walls and other vertical surfaces. Food safe, low VOC, low odour, non-taint. Can be applied to plaster, concrete, brick, blockwork, ceramic tiles, timber and previously coating surface (as long as the previous coating is not polyurethane based). Coverage rate will depend upon the porosity of the material.

Resupen WB - a two part polyurethane resin seamless coating. This UV stable coating can be used on both walls and floors on a wide variety of substrates including previously painted surfaces. It provides a seamless easy-to-clean hygienic surface that has good chemical and hot water resistance. Resupen WB has no VOCs, is low odour and non-taint. It has good impact and abrasion resistance. Satin or matt finish available. Coloured or clear versions available.

Ecuseal - a versatile elastomeric coating that can be used on internal walls, external walls and pitched roofs. Waterproof with excellent weather resistance. It maintains a high degree of flexibility even at low temperatures, can be applied to a variety of substrates, see technical data sheet for further details.

Pumacoat MP - an acrylic based single part ready-to-use-from-the-tin suitable for indoor and outdoor use on plaster, masonry and concrete walls. No odour, hard wearing, tough and resilient. Good resistance to UV yellowing. Economical.

Pumacoat V - a two part water-dispersed epoxy resin wall coating that provides a seamless easy-to-clean hygienic finish. Available in a range of colours or clear, all in a silk finish. Low VOC, low odour. Economical.

Pumatect V - a two part high build epoxy resin paint coating for walls and vertical surfaces. It provides an extremely durable robust finish. Available in a range of colours or clear, all in a gloss finish. Excellent long term wear and chemical resistance with a build equivalent of almost 10 coats of conventional solvent containing coatings for a 2 coat application.

Choosing the right flooring for a food processing area

A resin screed will give impact and abrasion resistance in very heavy duty industrial environments. Both epoxy resin screeds and polyurethane screeds offer excellent durability, robustness, chemical resistance and do not support bacterial or fungal growth. However, polyurethane offers superior resistance to thermal shock and is the best choice if the floor is ever likely to be steam cleaned. Polyurethane floor coatings also offer better resistance to thermal shock than epoxy coating, so if hot water is used as part of a cleaning regime it is worth bearing this in mind. Coatings offer abrasion and impact resistance but not to the same extent and do not last as long as screeds, they will need recoating after a number of years, but are less expensive in the short term. 

Hygienic resin floor screed textured anti-slip

Resuthane TG69 is a three part trowel-applied through-coloured polyurethane floor screed usually laid at 6-9mm. If the floor is going to be steam cleaned it should be laid at 9mm. Resuthane TG69 comes in a range of colour and has a matt finish with a slip-resistant textured profile. Food safe and non taint (Camden BRI Approved). 

Hygienic_resin_floor_screed_smooth_anti-slip_surface

Resuthane SL is a three part trowel-applied through-coloured polyurethane floor screed usually laid at 2-3mm (referred to as Resuthane SL23) or 4-5mm (referred to as Resuthane SL45). Resuthane SL comes in a range of colours and has a matt finish with a smooth slip-resistant profile. Food safe and non taint (Camden BRI Approved).

coved_resin_screed_skirting_for_seamless_floor_150

Resuthane JT44 is a three part trowel-applied through-coloured polyurethane floor screed used to form integral coved resin skirtings around the perimeter of the floor. Use in conjunction with Resuthane TG69, SL or other resin floor coatings. Resuthane JT44 is self-sealing, as with TG69 and SL, so no need for additional seal coats. It comes in a range of colours and has a matt finish. Food safe and non taint (Camden BRI Approved).

 

anti-slip_aggregate_light_scatter

Resupen WB is a two-part seamless hygienic polyurethane coating. Applied as a two-coat system, the slip-resistance can be varied by the size and spread of specially selected aggregates broadcast on to the first coat before it cures. It is worth noting that the more textured the surface the more slip-resistant it will be, but the harder it will be to clean. No VOCs. Available in satin or matt finish in a range of colours or clear.

 

Resucoat HB high build epoxy resin paint coating with high gloss finish

Resucoat HB is a two-part seamless hygienic high-build epoxy resin coating with a high gloss finish. Applied with primer coat of Resuseal WB then a top coat of Resucoat HB, the slip-resistance can be varied by the size and spread of specially selected aggregates broadcast on to the primer coat before it cures. It is worth noting that the more textured the surface the more slip-resistant it will be, but the harder it will be to clean. Low odour. Available in a range of colours.

arcon-resin-floor-paint

Resuseal WB is an economical two-part seamless hygienic epoxy resin coating with a semi-gloss finish. Applied as a two-coat system, the slip-resistance can be varied by the size and spread of specially selected aggregates broadcast on to the first coat before it cures. Suitable for light industrial use, if there is forklift truck traffic use Resucoat HB. Low odour. Available in a range of colours.

 

Call us on 01925852225 to discuss project specific requirements, get application advice, quotations and availability or CONTACT US online.

SEE ALSO:

arcon-anti-slip-stair-treads-nosings arcon-anti-slip-outdoor-surfaces arcon-case-study-food-safe-resin-floor arcon-case-study-new-food-safe-creamery-floor

 

ARCON CONSTRUCTION SUPPLIES, 19-20 PRESTWOOD COURT, LEACROFT ROAD, RISLEY, WARRINGTON, WA3 6SB

TEL: 01925 852225 - EMAIL: mail@arconsupplies.co.uk

COOKIE NOTICE

To continue viewing this site please accept cookies by selecting the accept cookies button at the bottom of this page.

Accept Cookies