Resurfacing uneven floors and concrete work areas to produce new smooth surfaces can be achieved by traditional sand /cement screeding, but this method has its limitations particularly where thin sections and fine tolerances are important. Refurbishment of large areas can also be very labour intensive. However, the use of self-levelling (smoothing) and pumpable screeds can prove quick and economical.
Self-levelling and pumpable screeds may be categorised into:
Underlayments to floor coverings e.g. carpets, tiles, vinyls and wood laminates. They are not designed for direct wear situations but are extremely useful in providing a smooth substrate on which to lay the final aesthetic layer. As an internal preparation they can be installed by even the most inexperienced operatives.
Sika® Latex Self Levelling is a ready to use latex modified cement based self leveller for floor smoothing and preparation of uneven internal floors prior to the laying of floor coverings, carpets, laminates and vinyls.
Overlayments or final wearing surface screeds designed to withstand punishing fork-lift truck regimes.
Self levelling pumpable screeds are used to renovate damaged and uneven industrial floors. Using the correct system large production areas and access aisles are returned to service rapidly. Typically up to 2000 square meters can be pumped and laid in one day. Using combined systems 50mm depth screeds are possible.
Febflor Ultralay is an exceptional example of this type of product. Laid at up to 20mm in one application it makes the smoothing of domestic and commercial floors simple with the minimum of disruption. It will also happily accept vehicular traffic.
Flowtop a complete polymer levelling screed and floor repair system for both internal and external locations.
Resuflor a self-smoothing, epoxy resin seamless floor finish, combining outstanding wearing properties with chemical resistance and a decorative finish. Resuflor is available in a range of colours and is ideally suited to areas where jointed finishes (tile, sheet) are not acceptable and where maximum cleanliness is essential.
Pumadur SL a medium duty, water based self smoothing polyurethane floor topping applied at 2 - 3mm. Available in a range of matt colours.
Ultratop Loft a one component trowellable coarse grained cementitious paste applied in layers of 2mm thick to create decorative floors. The finish can be a trowelled or mottled effect. Also suitable for walls
For more information on all our flooring products Contact us
To continue viewing this site please accept cookies by selecting the accept cookies button at the bottom of this page.Accept Cookies