From simple void filling to precision engineering applications we have a vast range of grouting, anchoring and fixing products to meet every situation. Cement based grouts with non-shrink characteristics are used for filling and grouting of base plates in steel framed buildings, machinery beds, crane rails, balustrades, bridge bearing pads and dowel bars. They can be used from “dry pack” to highly flowable consistencies without compromising on strength and non -shrink properties.
Higher performance resin non -shrink grouts are available for situations demanding resistance to dynamic loading, vibration and corrosion due to harsh environments and chemical attack. They are ideally suited for machinery anchoring and bedding in the automotive and canning industries.
Our systems offer perfect solutions for all high strength, non-shrink grouting, anchoring and fixing applications.
The type of grout chosen for grouting a baseplate will depend upon the magnitude of the load to be transfered (i.e. the required compressive strength), the depth of gap to be grouted, access, area and flow requirements. In most instances the load will be static and a cementitious grout will be sufficient.
Products include: Conbextra GP Conbextra HF Sika 212 Conbextra EP10/EPR 100 Newton Grout Fosroc LokFix Ultracrete HF Precision Grout Pozament General Purpose Construction Grout formerly Tarmac Cemrok Easi Flow Grout
The type of grout chosen for grouting a bolt hole or anchor will depend upon whether it is vertical, horizontal or inverted, the annulus, depth, pull-out force, fast-set/early strength gain requirements and whether it will be subject to vibration.
The method for repairing cracks to concrete will largely depend upon the width and depth of crack, as well as whether the concrete experiences vibration. Repair mortars can be used on the widest, followed by flowable grouts. Fine cracks can be filled with injection resins. See Resin Injection Grouts page for products and Concrete Floor Repair Methods for application tips.
Crane rail grouts must withstand high compressive forces, strong dynamic loading and vibration. Products for crane rail grouting include E33 Epoxy Grout, E70 Epoxy Grout, E140 Epoxy Grout, Epicon L Grout, Epicon M Grout, Epicon RT Grout, Nugrout Super Flow, Nugrout Hi Spec, 100 Newton Grout, High Build Mortar, Conbextra EP10/EPR
Machinery such as turbines, generators, compressors, rolling, stamping, draining and finishing mills, drop forges, reciprocating machines and other vibrating machinery with high dynamic loading require high performance grouts. Our range includes E33 Epoxy Grout, E70 Epoxy Grout E140 Epoxy Grout, 100 Newton Grout, Conbextra EP10/EPR, Epicon RT, Epicon L, Epicon M, Nugrout FC, Nugrout Superflow, Nugrout Hi Spec
Wind turbines create some of the most extreme demands of any grouting application. Grouts have to withstand huge dynamic loading and vibration, sometimes in off-shore marine environments or underwater applications, often difficult to access and require long distance pumps. See Onshore & Offshore Wind Farms
To continue viewing this site please accept cookies by selecting the accept cookies button at the bottom of this page.Accept Cookies