REPAIR OF CONCRETE FLOOR CRACKS

RESERVOIR METHOD

METHOD Clean out debris from the crack by raking or high air pressure line. Form a reservoir around the crack to contain the resin with general mastic or putty. Mix the fluid resin (for two component systems.) Pour the resin into the reservoir and allow it to seep into the crack. Top up reservoir as required. For cracks over 5mm width use a filled resin grout (see Materials)

Parent concrete Mastic reservoir Fluid resin MATERIALS Nitofil LV Tufbond S Masterflow 101 (filled resin) Click on product name for data and full application instructions

<< Back to list of methods

 

Home   ::   How to Repair Industrial Concrete Floors Manual   ::   Anti-Slip Floor Coatings   ::   Chemical Resistant Coatings
Self-levelling and Pumpable Screeds   ::   Anti-slip Floor Paints and Hygienic Coatings   ::   Fast Set Floor Repair Mortars
Why use epoxy resin grouts  ::   Epoxy and Polyurethane Resin Screeds and Seamless Floors  ::   Basement Waterproof Paints and Treatments
Fast Setting Highway, Motorway and Road Repair Products   ::   Concrete Repair Mortars   ::   European Standard EN 1504