Rapid Repair Mortars and Screeds

Ultracrete QC6 - Rapid set cement based mortar for repair of steps, floors, foot paths, roads and runways 12-100mm thickness. Open to traffic 2 hours.

Ultracrete QC10 - Deep section rapid repair concrete for backfill of gullies, manhole, frames and kerbs. 20-200mm thickness.

Make one call to our direct line 01925 852225 to receive straight forward technical advice or click here to email our Technical Services Department for immediate assistance and personal response

Patchroc GP - 12mm - 100mm patch repair.
May be filled out with aggregate for deep sections.
Open to traffic in 2 hours.

Paveroc - 12mm - 100mmfloor and screed reinstatement.
Open to traffic in 12/24 hours.

Febset 45 - 20mm+. Ultra rapid hardening for repairs in cold stores and freezer rooms.
Suitable for repairs as low as minus 18C
Open to traffic in 1 hour.

Tufpatch F.S. - Featheredge to 25mm.
Fast set, high strength mortar for floor, kerb, joint and step repairs.
Also used as bedding mortar.

Chemical Resistant Heavy Duty Screeds and Coatings

Epoxypatch H.D. - 5mm - 100mm heavy duty floor epoxy resin screed and repair concrete for aggressive environments.
Excellent as a bedding for machinery.

Nitomortar S - A high strength, abrasion resistant epoxy resin repair mortar and screed offering excellent chemical resistance. 3-50mm thickness.

Nitoflor FC130 - non toxic chemical and oil resistant coating.
For use in warehouses, kitchens, garages and light industry.

Flowseal EPW - a water based epoxy resin coating available in a variety of attractive colours ( matt or gloss ). Suitable for light industrial areas, food process and kitchen locations to provide hygienic surfaces.

Flowcoat SF41 (HB) - a high build, high performance solvent free epoxy resin coating. It gives excellent chemical resistance for floors in factories, warehouses, plant and storerooms.

Flowcoat SK - specifically designed for aircraft hangar floors this product has excellent chemical resistance to SKYDROL hydraulic fluids combined with high abrasion resistance.

Self levelling / Pumpable Screeds

Ultralevel IT HD TOP - an industrial grade self smoothing screed used to improve warehouse floors. Will resist forklift traffic at an early age. Upto 2000m² resurfacing per day at 5-15mm.

Ultralevel IT HD BASE - a sub layment self smoothing screed for use with Ultralevel IT HD TOP where thick section upto 50mm is required.

Febflor HD - 5-25mm internal and external self smoothing screed and concrete surface improver providing heavy duty wear characteristics.

Floor Surface Hardeners and Sealers

Tufcote Florseal - An acrylic resin emulsion designed to give an economic tough clear floor coating and sealer against dust.

Mastertop - Dry shake surface hardeners incorporated into concrete to give high abrasion resistance.

Nitoflor Lithurin - A surface hardener for new and old concrete floors to prevent dusting and increase durability.

Masterkure 181 - A combined concrete curing compound, surface sealer and dustproofer for freshly poured concrete floors and aged slabs.

Industrial Floor Joint Sealants

For further details on our Industrial Floor Joint Sealants click here.

For further details on our Paving and Landscape Jointing Compounds click here.

Chemlease/ Febstrike - chemical formwork and shutter release agents producing clean fair faced concrete finishes.

Chemcure S, Chemcure R75/ R90, Masterkure 191 - a range of concrete curing compounds reducing early water loss and resultant shrinkage and cracking of concrete.

Masterkure 181 - a combined concrete curing compound, surface sealer and dustproofer for freshly poured and aged concrete. Accepts further applied treatments.

Masterkure 106 - an economical water based curing compound reducing hairline cracks and shrinkage in concrete slabs and hard standings.