call us: (UK) 01925 85 2225
BUILDING - REPAIR - MAINTENANCE - INDUSTRIAL & CIVIL ENGINEERING SUPPLIES

Why use Epoxy Resin Grouts?

Over 1,000 International Products Stocked
FREE Independent Technical Advice

EPOXY RESIN GROUTS

For many grouting applications an Epoxy Resin Grout may be overkill and cement based aggregate filled grouts are sufficient. This is usually where non-shrink characteristics are required and loading is static. Epoxy resin grouts come into their own when situations demand much higher specification and greater reliability.

Typical examples of use are;

  • installation of machine base plates
  • crane rail fixing
  • motorway bridge bearing installation
  • dowel and starter bar fixing
  • bedding manhole frames
  • airport light installation
  • heavy machine bolt fixing
  • grouting in tight inaccessible areas

Epoxy resin grouts;

  • reach high compressive and tensile strengths
  • have excellent chemical resistance
  • withstand high dynamic loading and vibration
  • have negligible shrinkage allowing full contact and support
  • can be placed in much thinner sections
  • have a range of flow characteristics
  • possess strong adhesion to concrete and steel

arcon-heavy-machine-grouting vibrating reciprocating-compressor epoxy groutbridge bearing epoxy non-shrink groutsairport runway lights bed in non-shrink epoxy bade groutcrane rail grouting with non-shrink epoxy resin grout

Examples of epoxy resin grouts with a variety of uses are:

Masterflow 648CP a heavy duty non-shrink epoxy resin grout designed for very large pours and thick section grouting ideal for large scale machinery installations for medium and heavy industry. Withstands high dynamic loading and vibration. Final compressive strength 90N/mm2.

Conbextra EP a versatile range of epoxy resin grouts for use from 0.25 mm – 120 mm used for fine crack repairs in concrete  up to high dynamic loading and vibration situations in machine and bridge bearing installations.

E33 Epoxy Grout part of a range of high strength resin grouts for a variety of application thickness's. For use between 10-50mm

E70 Epoxy Grout part of a range of high strength resin products used at thickness's of 35-70mm.

E140 Epoxy Grout part of a range of high strength resin products used at thickness's of 70-140mm

Epicon L based on solvent free epoxy resins. It is one of five epoxy grouts in our range. These cover the majority of grouting and fixing applications encountered within civil engineering and the construction industry in general, where the mechanical properties must be of the highest order. It is for use in gaps over 20mm where heat build up is of concern.

Epicon Grout RT A pourable grout for free flow gap grouting recommended for gaps over 25mm where low Exotherm is of consideration.

Epicon Grout L A pourable grout for free flow gap grouting recommended for gaps 20mm to 100mm.

Epicon Grout M A lightly filled pourable grout for free flow gap grouting recommended for gaps between 5-40mm.

Epicon Grout S An unfilled grout for gap and crack widths between 0.25-6mm, also suitable for injection applications.

Epicon Grout H A thixotropic grout for horizontal or inverted fixings.

ARCON CONSTRUCTION SUPPLIES, 19-20 PRESTWOOD COURT, LEACROFT ROAD, RISLEY, WARRINGTON, WA3 6SB

TEL: 01925 852225 - FAX: 01925 852122 - EMAIL: mail@arconsupplies.co.uk