GENERAL FLOOR REPAIRS

For repairs to floors which have suffered from general wear and tear, erosion and impact damage.

METHOD

  • Saw cut around the perimeter of the repair area.
  • Break out loose and damaged concrete leaving a sound flat base for repair.
  • Prime the sides and base of the repair area.
  • Whilst the primer is still wet/tacky apply and compact the repair mortar. Allow sufficient time for the repair to gain strength before trafficking.
  • For repair depths of 3-50mm use epoxy resin mortars particularly where chemical resistance is required.
  • For repair depths of 10-100 use cement based mortars where applicable. Spray with water and cover with plastic sheet to reduce shrinkage or spray with a curing compound.
    		•   

    		Saw cut
    		Parent concrete
    		Damaged concrete
    		Primer
    		Concrete repair mortar

    MATERIALS

    Epoxy Resin Systems
    Epoxy resin primer
            Resuprime
    Epoxy resin mortar 3-50mm fast set
            Resupatch
    Epoxy resin mortar 3-100mm normal set
            Resuscreed 50

    Cement Based Systems
            Patchroc GP
            Ultracrete FTC
            Febset 45
            Paveroc/Patchroc

    Click on product name for data and full application instructions

    << Back to list of methods



    Home   ::   How to Repair Industrial Concrete Floors Manual   ::   Anti-Slip Floor Coatings   ::   Chemical Resistant Coatings
    Self-levelling and Pumpable Screeds   ::   Anti-slip Floor Paints and Hygienic Coatings   ::   Fast Set Floor Repair Mortars
    Why use epoxy resin grouts  ::   Epoxy and Polyurethane Resin Screeds and Seamless Floors  ::   Basement Waterproof Paints and Treatments
    Fast Setting Highway, Motorway and Road Repair Products   ::   Concrete Repair Mortars   ::   European Standard EN 1504

     

     

    INDUSTRIAL MAINTENANCE & CONSTRUCTION PRODUCTS

    CONSULTANCY, SERVICE & SUPPLY
    CALL NOW!
    Tel: 01925 852225