RS Cemcrete a polymer/cement based system designed for internal or external applications. It provides a durable trafficable surface with built in waterproofing an flexibility. Finished with a variety of textures it is ideal for resurfacing concrete and asphalt ramps to give added slip resistance. It may also be coloured to provide attractive surfaces.
Resucryl a range of internal and external floor/pavement coatings for most commonl substrate including concrete and asphalt. Water based with low VOC. Available in safety colours for line marking and barriers.
Nitoproof 800 an external coating and resurfacing system designed specifically for balcony, terraces and walkway refurbishment. Offering exceptional wear characteristics it is a waterproof system manufactured in environmentally sympathetic colours.
Renderoc ST 05 is designed for application to concrete decks and vertical surfaces in thin layers. For the filling of blow-holes or imperfections in concrete to produce a smooth surface, and at the same time provide a chloride and carbonation barrier. It can be left as a fairface finish or overcoated. It can be used as a scrapecoat, brush or trowel applied, placed in thicknesses from0-5 mm.
INSTAGRIP ANTI-SKID PATCH REPAIR
Instagrip Anti-Skid Patch Repair - a resinous patch repair material for anti-skid road and highways surfaces, or for reinstatement following utilities works, highways works etc.. It can be used to reinstate high friction surfaces such as pedestrian crossings, footbridges, walkways, subways, carparks, ramps, road junctions, roundabouts and the like. It may also be used as anti-skid anti-slip coatings for highways ironwork such as manhole covers. It is available in five colours - red, green, buff, grey and black. It a two-part resin system with aggregate provided.
SBR FRICTION COAT
SBR Friction Coat is an anti-skid anti-slip surfacing for road junctions, bends, corners, breaking zones, ramps and stairs. It is a 2-part system comprising cement with aggrgate and a latex guaging liquid laid in thin sections.
Resubind is a polyurethane resin binder to create bound slip resistant gravel surfaces by adding clean dry aggregates of your choice in to the resin. It is UV stable so will not yellow in direct sunlight and creates a durable, hardwearing surface that can be both highly slip-resistant and decorative. Suitable for both internal and external areas, it can be used on driveways, pathways, balconies, decks, tree pits, parks, shopping centres, entrances, showrooms, sports centres, car parks and mixed with rubber crumb for playground areas. Resubind is an easy-to-use, easy to lay, two part system.
Resugrip - a polyurethane resin system to produce bonded gravel surfaces. Suitable for use with a wide range of clean, dry natural and synthetic aggregates, to produce attractive, bespoke, slip-resistant surfaces. It can be applied to both internal surfaces, such as concrete, steel, weathered stable, macadam/tarmac and suitable asphalt and timber. It provides a hard-wearing, slip resistant surface which can be both highly functional and highly decorative depending upon your chosen aggregates. The aggregated is broadcast on to a wet-film of resugrip, which has excellent bond strength and will cure at cold temperatures down to 5 degrees celsius. It is a three part solvent-free system. Suitable for use in public areas, foyers, entrance halls, walkways, bridges, roadways, concourses, loading bays and much more.
PUMAGRIP HD 3
Pumagrip HD 3 - the pumagrip systems provide polyurethane resin binders to be applied to surfaces requiring slip-resistance and scattered with separately supplied natural or synthetic aggregates. They can be applied to concrete, polymer modified sand cement screeds, steel and suitable asphalt and timber. The system allows you to select aggregates of you choosing from any source to create any design, pattern or logos required. Suitable for use on car parks, pedestrian areas, ramps, breaking zones, roads and highways. It can accept pedestrian traffic after 6hrs, vehicular traffic after 24hrs. The HD 3 is a three part resin system.
PUMAGRIP HD 2
Pumagrip HD 2 - a flexible polyurethane binder which when scattered with natural or synthetic aggregate provides a non-slip surface suitable for ramps, roads, breaking zones, pedestrian areas and car parks. It can be applied to concrete, timber, steel, polymer modified sand cement screeds and asphalt. It is easy to apply, durable and hardwearing. It cures enabling light pedestrian traffic after 6 hrs and heavy vehicular traffic after 24hrs. It comes as a two-part resin and hardener system with aggregate supplied separately.
Epigrip high build epoxy resin coating, which has excellent adhesion to concrete, stone, metal, aggregates etc. Apply Epigrip to the substrate and broadcast aggregate over the wet film. It is weather, water and chemically resistant, providing a hardwearing, durable surface for heavy duty use. Suitable for walkways, balconies, industrial floors, forklift traffic and vehicular traffic. It is a two-part system.
Uradeck BC a flexible polyurethane coating designed to form a decorative waterproof surface for raised decks and walkways, suspended floors and industrial decks. Can be applied to concrete and steel with excellent bonds strengths to these surfaces and the slip-resistant aggregate. Surfaces can be trafficked after just 2 hours.
Stonebond a polyurethane resin designed to be used with natural stone aggregates to produce resin-bound and resin-bonded indoor and outdoor surfaces. Similarly it can be used with recycled glass aggregates. It is UV stable, so non-yellowing in direct sunlight.
Elladur is a high-performance high-build polyaspartic resin floor finish suitable for both outdoor and indoor use. Ideal for projects where a fast turnariound is required even in low temperatures. It is low odour, low VOC and chemically resistant. It gives a tough, durable, light-stable / UV resistant gloss finish suitable for industrial, commercial and domestic applications. And can be both decorative and highly functional.