Cement / Polymer Repair Products
For Columns, Beams, Soffits

Panel Repair

Sill Repair

Emaco Nanocrete Range AP, R2, R3, R4, R4 Fluid, FC - a simple effective range of primer and concrete repair products for use on horizontal, vertical and overhead situations.
All products meet the requirements of European Norm EN 1504.

Renderoc HB - A shrinkage compensated high build mortar used to repair concrete in overhead and on vertical surfaces.
Can be applied at 50mm depth in a single application.

Ultracrete GPR - A high strength high build, 10-100mm concrete repair mortar and render complying with Dtp Spec, BD 27/86.

Nupatch Cosmetic - A high early strength patching mortar in white and grey colours.
Excellent for matching existing concrete by blending.
Kerb and step repair.

Renderoc LA / Ultracrete MC - For large section repairs typically in excess of 50mm.
It is a flowing concrete with a high ultimate strength of 60N/mm2. Dtp spec.

Renderoc FC - For application in a thin 1-3mm layer used to resurface defective concrete e.g. spalling, honeycombing or blow holes.

Resin Repair Products For Aggressive Environments

Nitomortar S - A strong, abrasive resistant epoxy resin mortar for horizontal use and also suitable for thin section application for acid tanks and sea walls.

Nitomortar PE - A fast setting and hardening product ideal for repairing stair steps and risers. Suitable for all small precast concrete repairs.

Febset NF - An extremely strong epoxy resin putty/adhesive for fixing tiles, kerbs, copings. Brick cutting adhesive.
Also used to join speciality bridge profiles and securing traffic calming devices.

Nitofil LV/TH - Epoxy resin injection system used to repair cracks in walls, floors and all concrete structures

Tufpatch FS - Featheredge to 25mm.
Fast set, high strength epoxy mortar ideal for floor, joint, kerb and sett repairs.

Fast Set, Early Trafficking Repairs
For Highways, Pavements and Roads.
Products to BBA/HAPAS Standard.

Ultracrete PY4/PY5 - Fast set polyester resin manhole bedding and repair mortar.
Trafficable in 40 minutes.

Ultracrete IRR - An industrial permanent road repair tarmac for reinstatement up to the traffic surface after rebedding manhole frames. Also for repairs to damaged tarmacadam.
Can be trafficked immediately.
BBA/HAPAS approved.

Ultracrete QC6 - A fast set horizontal concrete repair for depths of 12-100mm. Rapid opening to traffic.