CONCRETE FLOOR RESURFACING

For large scale factory floor resurfacing and external hard standings

METHOD Remove all loose, unsound concrete and contamination by shotblasting (blastracking) the surface to ensuring that the concrete substrate is strong and open textured. Depending on the product to be used either: a) saturate the concrete with water and after soaking remove any free surface water. Whilst the concrete is still damp mix the smoothing compound and scrub it into the surface with a stiff broom. b) Apply two coats of primer to the dry substrate. Mix and pump the resurfacing compound over the area to the required thickness. Release trapped air and assist in levelling with a spiked roller. Allow to harden and traffic

MATERIALS Internal/External - Emaco T350SL Internal only - Ultralevel IT HD TOP with primer Ultraprime AR Click on product name for data and full application instructions

<< Back to list of methods

Home   ::   How to Repair Industrial Concrete Floors Manual   ::   Anti-Slip Floor Coatings   ::   Chemical Resistant Coatings
Self-levelling and Pumpable Screeds   ::   Anti-slip Floor Paints and Hygienic Coatings   ::   Fast Set Floor Repair Mortars
Why use epoxy resin grouts  ::   Epoxy and Polyurethane Resin Screeds and Seamless Floors  ::   Basement Waterproof Paints and Treatments
Fast Setting Highway, Motorway and Road Repair Products   ::   Concrete Repair Mortars   ::   Pothole Repair Products
European Standard EN 1504