Anti-Slip Floor Coatings

Make one call to our direct line 01925 852225 to receive straight forward technical advice or click here to email our Technical Services Department for immediate assistance and personal response

Are you looking to refurbish the floor in your factory or work place? Are you well aware of the health and safety legislation you have to comply with? Slippages and falls are still commonplace in UK work places despite health and safety improvements, with problem areas being wash down areas and traffic aisles.

To reduce the risk of slippages and falls, you will need an anti slip floor coating which today can be achieved by adding aggregates of varying particle size into a floor coating .This way an abrasive or rough, but importantly anti slip characteristic, will be obtained. Different types of filler can create an anti slip floor coating. Examples are silica sands and quartz, but the end result is the same: a significant improvement in anti-slip properties and abrasion resistance.

The anti slip aggregate can be applied in many different ways. There are two principal ways, however.

Firstly, the aggregate can be added to the paint solution and it will then be an integral part of the paint when applied to the floor. The other option is to first apply a paint to the floor and then spread the aggregate evenly over the paint in the quantity required. Depending on the situation, a second coat of paint is then normally applied over this aggregate finish to seal it and give colour. Whichever methodology is used, this new anti slip floor coating will enhance safety for pedestrians, and it is also useful where to give extra traction on slopes and ramps for forklift trucks etc.

Factory and Distribution. Warehousing. Automotive. Engineering. Power. Catering.

Chemical Processing. Packaging. Food and Drink. Pharmaceutical. Medical. Aerospace.

The RSL range of anti-slip floor coating systems provide durable, attractive finishes for some of the most demanding of industrial environments. They are available in a wide range of colours and non-slip flooring grades.

	Epoxy Resin Coatings
	Resuseal WB	- an attractive, durable, water-based, epoxy resin floor and wall paint for warehouses, production and food preparation areas. Exhibits low odour.
	Resucoat HB	- a high build, solvent free, heavy duty epoxy resin coating system applied at 200-500 microns. Gives exceptional wear resistance.
	Resutop LV	- a two pack epoxy resin fish for areas Where high build, hard wearing, chemical, Abrasion, and impact resistance is required.
	Polyurethane Coatings
	Resutile	- a high grade solvented polyurethane system designed for maximum chemical resistance. Stands up to high temperature cleaning. Suitable for breweries, mortuaries, abattoirs and vehicle maintenance floors.
	Resudeck	- a two pack, high build, durable polyurethane floor coating resistant to hot water and steam cleaning. Excellent adhesion to most surfaces including asphalt and bitumen.

Home   ::   How to Repair Industrial Concrete Floors Manual   ::   Anti-Slip Floor Coatings   ::   Chemical Resistant Coatings
Self-levelling and Pumpable Screeds   ::   Anti-slip Floor Paints and Hygienic Coatings   ::   Fast Set Floor Repair Mortars
Why use epoxy resin grouts  ::   Epoxy and Polyurethane Resin Screeds and Seamless Floors  ::   Basement Waterproof Paints and Treatments
Fast Setting Highway, Motorway and Road Repair Products   ::   Concrete Repair Mortars   ::   European Standard EN 1504